40V max XGT® Brushless Cordless 13/16″ SDS-PLUS AVT® Rotary Hammer, AFT®, AWS® Capable, Tool Only

The 40V max XGT® Brushless Cordless 13/16" SDS-PLUS AVT® Rotary Hammer Kit w/Dust Extractor, AFT®, AWS® Capable (GRH10Z) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and runtime for corded demands, without the cord. The GRH01 is powered by a 40V max XGT® battery (sold seperately) with a Makita-built brushless motor that combines to deliver the power and performance required for heavy-load applications. It can deliver up to 40% more hitting force*. The variable speed dial and trigger enables the user to match the speed to the application. This hard-hitting performance is combined with advanced comfort and convenience features including Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if the rotation of the bit is suddenly forced to stop. It is also equipped with Anti-Vibration Technology (AVT®) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle are engineered to further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance. The GRH10Z has dust extraction capability (not included) and is OSHA Table 1 compliant with an on-board HEPA Dust Extractor or stand-alone AWS® Extractor options. For added efficiency, the Rotary Hammer is equipped with Auto-Start Wireless System (AWS®), which uses Bluetooth® technology for wireless power-on and power-off communication between the equipped tool and dust extractor. Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site. Constant speed control automatically applies additional power under load for optimum performance. The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed, under load, to complete the most demanding jobs. Additional performance features include an electric brake that allows the tool to be repositioned faster for maximum productivity and a torque limiting clutch that is engineered to prevent gear damage by automatically disengaging gears during a bind-up situation. Convenience features include a built-in L.E.D. light, and an ergonomic soft-grip handle with a large 2-finger trigger that provides increased comfort on the job. It also features a retractable hook that allows the tool to be secured when not in use. It has 3-modes of operation including Rotation Only, Hammering with Rotation, and Hammering Only for a wide range of applications. The GRH10Z is ideal for a range of trades including mechanical, electrical, and plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control professionals, maintenance operations, and more. It accepts SDS-PLUS bits and is engineered to utilize Makita’s extensive line of Rotary Hammer Carbide bits. XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest. *Compared to the XRH06